PPG INDUSTRIES, INC -- ETHYLENE DICHLORIDE  -- 6810-01-015-7211
<pre>=====================  Product Identification  =====================

Product ID:ETHYLENE DICHLORIDE
MSDS Date:01/01/1987
FSC:6810
NIIN:01-015-7211
=== Responsible Party ===
Company Name:PPG INDUSTRIES, INC
Address:1 PPG PL
City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Emergency Phone Num:NONE
CAGE:DO894
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695
Company Name:PPG INDUSTRIES, INC.
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Phone:412-592-5555
CAGE:DO894

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE DICHLORIDE  (SARA III)
CAS:107-06-2
RTECS #:KI0525000
Fraction by Wt: 100%
OSHA PEL:50 PPM/C,100PPM
ACGIH TLV:10 PPM; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ETHYLENE DICHLORIDE IS SUSPECTED CARCINOGEN
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

Effects of Overexposure:EYES:PAIN, IRRIT
    SKIN:IRRIT,DERMATITIS.INHAL:HEADACHE,DIZZINESS,INTER BLEEDING,LIVER
    KIDNEY DAMAGE.

=====================  Fire Fighting Measures  =====================

Flash Point:65F/18C (O.C)
Lower Limits:6.2
Upper Limits:15.9
Extinguishing Media:DRY CHEMICAL,FOAM,CO*2.
Fire Fighting Procedures:WATER SPRAY SHOULD BE USED TO KEEP FIRE
    EXPOSED CONTRS COOL
Unusual Fire/Explosion Hazard:USE SCBA.TOXIC,CORROSIVE FUMES OF HCL
    +PHOSGENE POSSIBLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PROPER PERSONAL PROTECTNEVACUATE AREA
    PROVIDE ADEQUATE VENTILATION AND REMOVE ALL SOURCES OF IGNITION.USE
    ABSORBENT MATERIALAND COLLECT FOR PROPER DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN DRY, COOL AND WELL VENTILATED
    AREA.LABEL PROPERLY AND KEEP CONTAINER TIGHTLY CLOSED.AVOID CONTACT
    WITHFLAMES AND HEAT.
Other Precautions:AVOID CONTACT WITH EYES AND SKIN. DO NOT EAT, DRINK
    AND SMOKE IN WORK AREA. DO NOT BREATHE VAPORS. ITEM IS SUSPECTED
    CARCENOGIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APROVED RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:2509
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
    WASH STATION
Supplemental Safety and Health
MSDS UNDATED. ITEM IS SUSPECTED CARCINOGIN, USE NECESSARY PRECAUTION IN
    ITS USE.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=83.C, 181.4F
Vapor Pres:87
Vapor Density:3.4
Spec Gravity:1.255
Evaporation Rate &amp; Reference:<1.0 (ETHYL ETHR=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUID SWEET CHLOROFORM TYPEODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:FLAMES,INTENSE HEAT SOURCES,ELECTRIC ARCS
Hazardous Decomposition Products:HCL, TRACE OF PHOSGENE

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT LOCAL AUTHORITIES.DISPOSAL MUST BE IN
    ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.