HOBART BROTHERS CO -- FABLOY 1CM, 2CM, 2N, 3N, T, AWS A5.28  -- 3439-00F007324
<pre>=====================  Product Identification  =====================

Product ID:FABLOY 1CM, 2CM, 2N, 3N, T, AWS A5.28
MSDS Date:01/01/1987
FSC:3439
NIIN:00F007324
=== Responsible Party ===
Company Name:HOBART BROTHERS CO/TROY, OH 45373
Emergency Phone Num:(513) 339-6000
CAGE:28835
=== Contractor Identification ===
Company Name:HOBART BROTHERS CO
Address:600 W MAIN ST HOBART SQUARE
Box:City:TROY
State:OH
ZIP:45373
Country:US
Phone:513-339-6000
CAGE:28835

=============  Composition/Information on Ingredients  =============

Ingred Name:NICKEL (SEE SUPPLEMENTAL FOR INGREDIENTS)
RTECS #:AR5950000
ACGIH TLV:1 MG/CUM

Ingred Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:SILICON
RTECS #:EW0400000
ACGIH TLV:20 MG/CUM

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:DIZZINESS, NAUSEA, DRYNESS, IRRITATION OF NOSE,
    THROAT, EYES, DAMAGE TO LUNGS & ASTHAMA, KIDNEYS.

=======================  First Aid Measures  =======================

First Aid:EYE & SKIN: IF IRRITATION OR FLASH BURNS DEVELOP AFTER
    EXPOSURE, CONSULT PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
    COMBUSTIBLES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:ARC RAYS CAN INJURE EYE & BURN SKIN.
    ELECTRIC SHOCK CAN KILL. TRAIN THE WELDER TO KEEP HIS HEAOUT OF THE
    FUMES.
Other Precautions:TO DETERMINE THE COMPOSITION/QTY OF FUMES & GASES
    TAKE AN AIR SAMPLE INSIDE THE WELDER'S HELMET OR IN BREATHING
    OZONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED AIR SUPPLIED RESPIRATOR WHEN
    WELDING IN CONFINED
Ventilation:USE LOCAL EXHAUST VENTILATION TO KEEP <TLV. IF >TLV
Protective Gloves:WELDER'S
Eye Protection:FACESHIELD W/FILTER LENS
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
    PROTECTION.
Supplemental Safety and Health
MSDS DATE: 8/85. ALSO CONTAINS: IRON, MANGANESE, MOLYBDENUM.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
FE, MN, SI, TI, CR, NI, MO, CU, N
Hazardous Decomposition Products:CO, CO2, OZONE NOX. OXIDES OF FE/MN/S
    I/TI/CR/NI/MO/CU/N.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
    LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
    WITH FEDERAL, STATE &  LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.